Press the (P) button on the WB2 for 5 seconds and unplug and reconnect the wire of the WB2

1. Please check if your enter the CORRECT Wi-Fi password
2. The WB2 cannot get a IP position from the router. Please reboot your router

1. Unplug and reconnect the wire of the WB2 and check if the Blue LED ON
2. Wi-Fi signal is weak. Please enhance the Wi-Fi signal.

Enter the operation page of the device in Chow-> Click the (Device information) in the setting page -> Tap (PIN Code Setting)

Return to the factory setting is used when you forgot your PIN code. 1. Tap the device icon on the main page for 3 seconds and delete the device
2. Open the Wi-Fi box, press the (P) button for 5 seconds and release it.
3. Plug off the and reconnect the wire to restart the WB2
4. Reconnect the WB2 to your home Wi-Fi

Press the (P) button of the ChowHUB for 5 seconds and press the (R) button once

1. Please check if your enter the CORRECT Wi-Fi password
2. The ChowHUB cannot get a IP from the router. Please reboot your router

1. Press the (R) button of the ChowHUB and check if the Blue LED ON
2. Wi-Fi signal is weak. Please enhance the Wi-Fi signal

Enter the operation page of the device in Chow-> Click the (Device information) in the setting page -> Tap (PIN Code Setting)

Return to the factory setting is used when you forgot your PIN code.
1. Tap the device icon on the main page for 3 seconds and delete the device
2. Open the ChowHUB, press the (P) button for 5 seconds and release it.
3. Press the (R) button once
4. Reconnect the ChowHUB to your home Wi-Fi

1. Delete the ChowCAM on the Chow! App by long press the ChowCAM icon and delete it
2. Press the reset button for 10 seconds until you hear the click sound from the ChowCAM
3. You can find the ChowCAM' AP from the Wi-Fi setting page of your samrt phone

1. Make sure the antenna is well connected
2. Make sure your smart phone is close to the ChowCAM
3. If the ChowCAM has already connected to the Wi-Fi network, the AP mode will turn OFF antomatically.
4. Please do "Return to the factory setting"

1. The system cannot connect with None-English SSID/Wi-Fi network
2. Make sure the antenna is well connected
3. Makre sure the Wi-Fi signal is strong (above -60dBm)
4. Make sure the Wi-Fi is 2.4GHz
5. Make sure your enter the CORRECT password.

1. Make sure your Wi-Fi is functional
2. Un-plug and reconnect the power plug of he ChowCAM
3. Check if you enter the PIN code at the device page

1. Delete the ChowCAM on the Chow! App by long press the ChowCAM icon and delete it
2. Press the reset button for 10 seconds until you hear the click sound from the ChowCAM
3. You can find the ChowCAM' AP from the Wi-Fi setting page of your samrt phone

1. Make sure the antenna is well connected
2. Make sure your smart phone is close to the ChowCAM
3. If the ChowCAM has already connected to the Wi-Fi network, the AP mode will turn OFF antomatically.
4. Please do "Return to the factory setting"

1. The system cannot connect with None-English SSID/Wi-Fi network
2. Make sure the antenna is well connected
3. Makre sure the Wi-Fi signal is strong (above -60dBm)
4. Make sure the Wi-Fi is 2.4GHz
5. Make sure your enter the CORRECT password.

1. Make sure your Wi-Fi is functional
2. Un-plug and reconnect the power plug of he ChowCAM
3. Check if you enter the PIN code at the device page